ocxo raltron electronics corp. 10651 n.w. 19 th s t miami, florida 33172 u.s.a . phone: +001(305) 593 - 6033 fax: +001(305)594 - 3973 e - mail: sales@raltron.com internet: http:/www.raltron.com ocxo series 3000 n features small ocxo in euro package frequencies up to 160 mhz n electrical performance parameter ocxo series 3000 at cut crystal sc cut crystal supply voltage, nom. 12v, 5v 5% standard (3.3v optional) power dissipation steady sta te 1.5 watt max. heat up power 3 watt max heat up time. 3 min max frequency range 1 to 160 mhz standard frequency adjustment 10ppm min (0 to 5v) 0.7ppm min (0 to 5v) 0.05 ppm 0.1 ppm 0.25 ppm 0.01 ppm 0.02 ppm 0.03 ppm freq. stability vs. temperature lx: 0c to 60c fz: - 30c to 70c d 3: - 40c to 85 (standard, contact factory for different temp ranges and stabilities) freq. stability vs. supply changes 0.015 ppm max for 5% change 0.010 ppm max for 5% change f req. stability vs. load changes 0.01 ppm max for 5% change 0.005 ppm max for 5% change long term stability (aging) 4 ppm max for 10 years 0.005 ppm/day max. 1 ppm max for 10 years 0.002 ppm/day max. output hcmos/ttl/sine 0 to +7dbm (low voltag e cmos available) harmonics, sub harmonics - 30dbc(sine output) spurious - 75dbc(sine output) duty cycle 40/60% to 60/40%(hcmos) rise / fall time 10ns max. (hcmos,10%~90%vout, 90%~10%vout) short term stability (10mhz) 1 e - 10 /sec 5 e - 11 /sec phase nois e (sine output 10mhz ? under static conditions) offset phase noise 10hz - 90 dbc/hz 100hz - 125 dbc/hz 1000hz - 135 dbc/hz 10000hz - 150 dbc/hz offset phase noise 10hz - 110 dbc/hz 100hz - 130 dbc/hz 1 000hz - 140 dbc/hz 10000hz - 150 dbc/hz note: all typical parameters for a 10mhz output and 5v supply, for different frequencies consult factory
ocxo raltron electronics corp. 10651 n.w. 19 th s t miami, florida 33172 u.s.a . phone: +001(305) 593 - 6033 fax: +001(305)594 - 3973 e - mail: sales@raltron.com internet: http:/www.raltron.com n how to order (part number) prefix output type cut type series revision temperature ra nge stability frequency supply voltage ox 2:hcmos 4:lvcmos 6:sine 0:at (no vcontrol ) 1: sc (no vcontrol ) 4: at (elect vcontrol) 5: sc (elect vcontrol) 3x:3000 34: height= 0.5?/12.7mm 36: height= 0.63?/16mm 37: height= 1?/25.4mm 39: height = 0.75?/19mm a first letter lowest temperature, second letter highest temperature: from a= - 55c to z=+70c, then: 1=+75c, 2=+80c, 3=+85c? in 5c steps example: lz: +0c to +70c lx: +0c to +60c fz: - 30c to +70c d3: - 40c to +85c value x 10e - 2 in ppm example 28= 0.28ppm 10= 0.1ppm in mhz 3.3: 3.3v 5; 5v 12; 12v 15; 15v example : ox 6 5 36 a - lz - 2 - 20.000 - 5 frequency 20 mhz temp stability = 2 x 10e - 2 = 0.02 ppm operating temp range = 0c to +70c revision "a" 3=series 3000, 6= max height 16mm sc cut crystal, electrical control voltage output sine wave prefix: ocxo supply ? 5v n mechanical specification height, max. ?h?: 0.5? / 12.7 mm (oxxx34) 0.63? / 16 mm (oxxx36) 0.75? / 19.1 mm (oxxx39 ) 1? / 25.4 mm (oxxx37) outline tolerance: 0.015? / 0.4mm pin functions: [1] n/c or control voltage [2] n/c or reference voltage out [3] supply voltage [4] rf output [5] case / ground
|
